Original Restored Antique Cast Iron Victorian Tiled Fireplace Insert (QP037). Reclaimed original Antique Victorian cast iron Tiled Fireplace. Complete with Fire Bars, Adjustable Canopy Hood and New Firebrick Back (Quarry). New Authentic Tiles (Green and Red). A working fire or can be used as a decorative piece.We supply a range of additional bespoke components to ensure you have everything that you require for your intended use. A detailed list of components can be located further down in this description. For costs and more information please don't hesitate to enquire. Please see all the pictures, these help to form part of the description. All dimensions are approximate overall sizes. Body Width 42 (Outside Leg to Outside Leg). If you require any further dimensions, please don't hesitate to ask.
Restored and Ready to Install. The cast iron Tiled Fireplace as pictured has been professionally restored. Sandblasted, primed and coated with Thermolac, a specialist heat proof paint. A coat of traditional wax based graphite polish has then been applied to help seal and further protect the cast iron. The polish provides a silver black finish, it also emphasises and highlight the detailing in the casting.The Fireplace will be supplied with a new tapered Firebrick Back. A Firebrick Back is a great option for increasing the efficiency of your fire, it helps to reflect the heat back out into the room. Our Firebrick Backs are available in Fondu and Fire Clay in a range of sizes to suit and fit your chosen Fireplace. We supply the Firebrick Back in its raw state to ensure mortar will adhere when installing. To clarify a Firebrick Back (please see the last picture). The Firebrick Back as photographed with the Fireplace has been spayed for aesthetics purposes in our photo stand, please read the details as follows.
Once you have completed the installation of your Fireplace you might like to spray the Firebrick with the'Black Thermolac Spray' to colour match everything together. If you are intending to use the Fireplace as a Solid Fuel Fire the Firebrick will naturally go black once used. Freestanding Solid Fuel Stool Grate. Fabricated in Steel to fit perfectly. The Grate is scribed to the contours of the Fire Bars and finished at the correct height suitable for the intended use.
Once installed, the Fireplace and Firebrick Back combined leaves you with an open Flue. Tiled Combination Fireplaces prove to be more desirable as they have a built in Closure Plate (Damper) to close off the Flue when not in use. You often find that Combination Fireplaces have a small restrictive Grate area, which limit your heat output and choice of Solid Fuels (Logs and large pieces of Wood). Having an open Flue is not always ideal, especially in property's with significantly large Chimneys which can create cold down drafts.To overcome this problem we designed a unit based on the same principles as the Combination Fireplace. The bespoke unit which is fabricated in Steel follows the back contours of the Fireplace and is fully aligned with the top of the Firebrick Back to create a box. The unit has a hinged Plate. The Plate can also be completely removed to allow adequate access into the Flue. The Closure Unit is not suitable for use with a Gas Burner. Regulations stipulate that Fireplaces intended for use with Gas must have the Closure Plates removed or permanently fixed in the upright position, so not to interfere with flue extraction. A Front Tidy is not just for decorative frontage it also serves a practical use to hide the ashes or Ash Pan beneath.
Fabricated in Steel following the contours of the Fire Bars. If the Tidy is intended for use with a Gas Burner, it's important that we are notified to ensure we supply'notched.
To allow for adequate ventilation. For the containment and easy disposal of the fire ashes.
Fabricated in Steel to suit the intended opening beneath the Fire Grate, ensuring that your ash is contained effectively to then dispose of cleanly and safely. CE Approved made to measure Gas Burner suitable for Natural Gas and LPG.Please contact for further information. Full installation service available at an additional cost. All my items are available to view in my showrooms near York. Please contact to arrange a viewing. Collection is preferred due to the weight. I always aim to be detailed and honest in my listings. If we have got it wrong please let us know and we will amend the listing.
Via our contact details located in our. Thank you for your interest.
Please feel free to take a look at my other items. The item "Original Restored Antique Cast Iron Victorian Tiled Fireplace Insert (QP037)" is in sale since Sunday, January 27, 2019.
This item is in the category "Antiques\Architectural Antiques\Fireplaces, Mantels & Fireplace Accessories". The seller is "abacusarchitecturalantiques" and is located in York. This item can be shipped to United Kingdom.